One Man’s Junk

2007 Tahoe has stuck lifters due to the displacement on demand. Deleting the DOD, new lifters, new cam, new valley cover, new gaskets and the computer redone.

Alright guys, it's been super hectic since I got diagnosed with one of the tick fevers. Over the last couple months I've replaced a brake line, and tie rods on a1993 f-250 4wd 7.3, steering box, pitman arm, radiator, radiator hoses, ac compressor, ac condenser, ac lines, headlights, taillights, pcv valve, valve cover gaskets, clutch disc, pressure plate, flywheel resurfaced, slave cylinder, master cylinder, and rebuilt nv4500 transmission on my 2001 Chevy 2500hd 6.0 4wd, adju...st parking break, fix rear differential leak, upper control arms with ball joints, lower ball joints with 1" sleeves and change the fuel pressure relief valve on a 2006 GMC Sierra 2500hd 4wd 6.6 LLY Duramax, and change the load sensor shaft, bushings, and bearings on my hesston 556 tractor. Upcoming this weekend is a blower motor on a 99 Durango, injection pump pressure test on a 1985 f-250 6.9 idi non turbo (I have already replaced glow plugs and injectors and return fuel lines on this truck. See more

Got some valves lapped tonight. The dark picture is after I lapped them and the picture showing light is during the process. I’ll post some pictures tomorrow of the valves before I touched them.

Got the heads pretty clean. Next step is some touch up cleaning and then the valve stem seals and then I can lap the valves and finish the heads.

Hey guys, new project is a 2001 GMC Yukon 1500 XL with a 4L60E transmission and a 5.3 vortec. Got the heads off and in the process of cleaning them and upgrading the valve springs, push rods, lifters to LS7, and a newer stock cam. New valve stem seals and valves lapped. I’ll be posting more pictures along the way. Here’s some from cleaning the heads and valves.